How To Get Rid Of Epson Error Code 0x97?
Error code 0x97 is a warning message, when
there is an issue with the internal hardware. It may happen due to motherboard
failure or other internal parts. While this technical issue takes place, it
occurs suddenly and may lead for your printing machine to turn off or prevent
printing. Hardware failure may need a quick fix or replacement. To fix this
error code, you can call at Epson support phone number to get effective technical methods. Here are some
technical ways to fix Epson error code 0x97 instantly.
Online
Troubleshooting ways to fix Epson error code 0x97
When a hardware failure takes place without
warning message, you can try the following steps-
Unplug and Plug-in-
- When this error
message appears, turn on and off power and disconnect.
- Disconnect all
linked cables.
- Disconnect USB
drivers.
- Eliminate all
printer cartridges.
- Still turned off,
push down power to release all rest current in the printing machine.
- Connect in all
the cables and USB. Install again printer cartridges. Turn on power button.
- Observe if the
error message remains.
- If error
continues, go for next step.
Unplug and plug in (2)-
- Turn off Epson
printer and disconnect.
- Unplug all the power
cables and USB.
- Wait for five
minutes until printing machine cools down.
- Press and hold
power option for sixty seconds. Don’t release.
- After 60 seconds,
connect in the power cable and hold for another sixty seconds.
- Leave power
option. Make sure if the error message still displays.
Clear out mechanic pad
- Turn off Epson
printer and disconnect.
- Eliminate printer
cover and casing.
- Wet tissue with
hot water and try to wipe clean pad
- Release wet
tissue for a few minutes on the pad
- Take out tissue
and release it to dry fully.
- Plug in and turn on the printing machine.
- Observe if error continues, you can call at Epson printer support phone number to get expert’s help immediately.
Comments
Post a Comment